Main Features:
- 1/3” 1.3 Mp Aptina CMOS
- 720P (1~25fps / 30fps)
- Alarm, Audio, Memory Card, PoE (Without Lens)
Specification:
General:
- Main Processor: Ti DaVinci Series DSP
- Operating System: Embedded LINUX
- Capacity: Simultaneous remote monitoring, local recording, and remote control
- User Interface: WEB, CMS, NVR
Camera:
- Image Sensor: 1/3″ 1.3 Megapixel Progressive Scan Aptina CMOS Sensor
- Effective Pixels: 1280(H) × 960(V)
- Electronic Shutter: 1/5s to 1/50,000s
- Minimum Illumination:
- Color: 0.1 Lux / F1.2
- B/W: 0.005 Lux / F1.2
- Signal Noise Ratio: >50dB
- Day/Night Mode: Auto, dual IR-Cut filter
- Gain Control: Auto / Manual
- White Balance: Auto / Manual
- WDR Dynamic Range: DWDR
- Lens Mount: C/CS
- Auto Iris: Supported
Video:
- Video Compression: H.264 / MJPEG (Optional)
- H.264 Encode Types: Baseline / Main Profile / High Profile (Optional)
- Video Bit Rate:
- Main Stream: 200Kbps ~ 8Mbps
- Sub Stream: 100Kbps ~ 6Mbps
- Image Resolution:
- 1.3MP (1280 × 960)
- 720P (1280 × 720)
- D1 (704 × 576 / 704 × 480)
- Encoding Speed:
- Main Stream: 1.3MP / 720P / D1 (1~25fps / 30fps)
- Extra Stream: D1 / CIF (1~25fps / 30fps)
- Video Format: PAL / NTSC
- Analog Video Output: 1 channel BNC (1.0Vp-p, 75Ω)
Audio:
- Audio Compression: G.711a / G.711u (Optional)
- Audio Bit Rate: G.711a (8kbps) / G.711u (8kbps)
- Audio Input: 1-channel 3.5mm audio interface (MIC IN / Line IN)
- Audio Output: 1-channel 3.5mm audio interface (line level, 600Ω)
Network:
- Ethernet: RJ-45 (10/100Base-T)
- Network Protocols:
- Ipv4 / Ipv6
- RTSP
- TCP / UDP
- HTTP
- DHCP
- DNS
- FTP
- DDNS
- PPPoE
- SMTP
- Common Features: One button reset, Prevent Flicker, Dual-stream, Heartbeat, Password Protect, Video cover, Motion Alarm
- ONVIF: Ver. 2.3
- Max User Access: 10 users
- Smartphone Compatibility: iPhone, iPad, Android
- Remote Operation: Monitor, System setting, Log information, Maintenance & Upgrade
Auxiliary Interface:
- Reset Input: One Reset Button (Hold for at least 3 seconds)
- SD Card: Max 32GB, local storage
- RS485: PTZ control
- Alarm Input: 1-channel input, Normally Open / Normally Close modes adjustable
- Alarm Output: 1-channel output, 120VAC 1A / 24VDC 1A
- Video Output: 1Vp-p Composite Output (75Ω / BNC)
Environmental:
- Power Supply: DC12V
- Power Consumption: <3W
- Working Environment: -10ºC ~ +50ºC, Humidity less than 95% (Non-condensing)
- PoE: IEEE802.3af
- Dimensions: 150.2mm × 77.7mm × 55.8mm
- Weight: 0.51 Kg
